Collection:
Rodac
1117 products
Rodac RDXL35133 - Carbide Burs Set - 8 Pieces
The RODAC carbide chisel set has 8 pièces with 1/4'' shank offering different sizes for your convenience: SA: 3/8" X 3/4" & 1/2" X 1", SC: 3/8" X 3/4" & 1/4" X 5/8", SD: 1/4" X 1/4", 1/4" X...
Rodac RDXL35BP - 35PC CALIBER TOOL KIT
The RODAC Brake Caliper Tool Kit with box includes 35 pièces that will fit most cars.
Rodac RDXL3M - Socket tray - MET
RODAC socket holder set in ABS plastic, metric for short and long sockets. 3 pièces: 1/4" socket - 28 stations, 14 sizes: 4-15 mm, 3/8" socket - 30 stations, 15 sizes: 6-20 mm, 1/2" socket - 34 sta...
Rodac RDXL3S - Socket Tray - SAE
ABS plastic socket holder set, SAE 3 pièces: 1/4" socket - 26 stations, 13 sizes: 1/8" - 5/8", 3/8" socket - 26 stations, 13 sizes: 1/4" - 1", 1/2" socket - 28 stations, 14 sizes: 3/8" - 1-1/4".
Sold Out
Rodac RDXL40005 - Step Drill Tin Coated 1/8" to 1/2"
The RODAC step drill with titanium nitride coating offers a diameter of 1/8" to 1/2".
Rodac RDXL40007 - Step Drill Tin Coated 1/4" to 3/4"
The RODAC step drill with titanium nitride coating offers a diameter of 1/4" to 3/4".
Rodac RDXL40008 - Step Drill Tin Coated 3/16" to 7/8"
The RODAC step drill with titanium nitride coating offers a diameter of 3/16" to 7/8".
Rodac RDXL40009 - Step Drill Tin Coated 1/4" to 1-3/8"
The RODAC step drill with titanium nitride coating offers a diameter of 1/4" to 1 3/8".
Sold Out
Rodac RDXL50HD - Automatic Wire Stripper
RODAC heavy duty wire strippers in red and black. Precision-ground stripping holes allow easy removal of the insulation without damaging the wire. The pliers are corrosion resistant due to their ro...
Rodac RDXL53227 - Screw Extractor Set - 25 Pieces
Set of 25 bolt extractors: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32...
Rodac RDXL54009 - Twist socket extractor set (10 pcs. • MET)
RODAC Twist Socket Puller Set (10 pièces SAE). Outer hex #1: 9mm, 16mm #2: 10mm, 16mm #3: 11mm, 17mm #4: 12mm, 19mm #5: 13mm, 19mm #6: 14mm, 21mm #7: 15mm, 22mm #8: 16mm, 24mm #9: 17 mm, 24mm #10: ...
Sold Out
Rodac RDXL6081 - Jack
Jack
Primer finish
Weld-on
Topwind
2,000 lb
Sold Out
Rodac RDXL6082 - Trailer Jack
Trailer Jack
Capacity: 2000 lb
With 2 wheels
Sold Out
Rodac RDXL6083 - Trailer Jack 1000L
The RODAC single wheel trailer jack offers a 1000 lb load capacity for lifting heavy loads.
Rodac RDXL7610 - Telescopic Pick Up Tool
Telescopic Pick Up Tool
Capacity:10 lb
7 1/2” to 30 1/5”
Rodac RDXL7616 - Telescopic Magnet Kit - 6 Pieces
Telescopic magnet kit from RODAC. Consists of 6 pièces in one that extend from 7 3/8” to 30” and has a lifting capacity of 16 lbs.
Sold Out
Rodac RDXLG6061V - Air Compressor
Air Compressor
11,2CFM@100 PSI
Motor:5 HP
Tank:60 gallons
Maximum pressure:135 PSI
Factory pressiure setting: 95-125 PSI
Approved CSA
1 year warranty
Rodac RDYF1019B - Square Screw Extractor Set - 5 Pieces
Screw extractor set by RODAC, contains 5 pièces. The sizes are: 1/8”, 3/16”, 15/64”, 5/16” and 3/8”. Made of CRMO steel.
Sold Out
Rodac RDYF1020 - Screw Extractor Set - 7 Pieces
RODAC 7 piece square puller set in CRMO steel for studs. Sizes: 1/8", 3/16", 15/64", 5/16", 3/8", 15/32" and 9/16".
Sold Out
Rodac RDYF1021 - Screw Extractor Set - 10 Pieces
RODAC 10 piece square stud puller set in CRMO steel. Sizes: 1/8", 3/16", 15/64", 5/16", 3/8", 15/32", 9/16", 21/32", 13/16" and 1-1/16".
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
